Integrated Heat Recovery System Based on Mixed Ionic-Electronic Conducting Membrane for Improved Solid Oxide Co-Electrolyzer Performance.

The current state of mixed ionic-electronic conducting ceramic membrane technology presents significant advancements with potential applications in various fields including solid oxide electrolyzers, fuel cells, hydrogen production, CO2 reduction, and membrane reactors for chemical production and oxygen separation. Particularly in oxygen separation applications, optimal conditions closely align with the conditions of oxygen-rich air streams emitted from the anode of solid oxide co-electrolyzers. This paper describes and analyzes a novel integrated heat recovery system based on mixed ionic-electronic conducting membranes. The system operates in two stages: firstly, oxygen is separated from the anode output stream using mixed ionic-electronic conducting membranes aided by a vacuum system, followed by the heat recovery process. Upon oxygen separation, the swept gas stream is recirculated at temperatures near thermoneutral conditions, resulting in performance improvements at both cell and system levels. Additionally, an oxygen stream is generated for various applications. An Aspen HYSYS® model has been developed to calculate heat and material balances, demonstrating the efficiency enhancements of the proposed system configuration.

The Mechanism of Antimicrobial Small-Cationic Peptides from Coarse-Grained Simulations.

Antimicrobial cationic peptides (AMPs) are excellent candidates for use as therapeutic antimicrobial agents. Among them, short peptides possessing sequences of 9-11 amino acids have some advantages over long-sequence peptides. However, one of the main limitations of short peptides is that their mechanism of action at the molecular level is not well-known. In this article, we report a model based on multiscale molecular dynamics simulations of short peptides interacting with vesicles containing palmitoyl-oleoyl-phosphatidylglycerol (POPG)/palmitoyl-oleoyl-phosphatidylethanolamine (POPE). Simulations using this approach have allowed us to understand the different behaviors of peptides with antimicrobial activity with respect to those that do not produce this effect. We found remarkable agreement with a series of experimental results directly supporting our model. Moreover, these results allow us to understand the mechanism of action at the molecular level of these short peptides. Our simulations suggest that mechanical inhomogeneities appear in the membrane, promoting membrane rupture when a threshold concentration of peptides adsorbed on the membrane is achieved. These results explain the high structural demand for these peptides to maintain a delicate balance between the affinity for the bilayer surface, a low peptide-peptide repulsion (in order to reach the threshold concentration), and an acceptable tendency to penetrate into the bilayer. This mechanism is different from those proposed for peptides with long amino acid sequences. Such information is very useful from the medicinal chemistry point of view for the design of new small antimicrobial peptides.

Small Cationic Peptides: Influence of Charge on Their Antimicrobial Activity.

The first stage of the action mechanism of small cationic peptides with antimicrobial activity is ruled by electrostatic interactions between the peptide and the pathogen cell membrane. Thus, an increase in its activity could be expected with an increase in the positive charge on the peptide. By contrast, the opposite behavior has been observed when the charge increases to reach a critical value, beyond which the activity falls. This work studies the perturbation effects in a cell membrane model for two small cationic peptides with similar length and morphology but with different cationic charges. The synthesis and antibacterial activity of the two peptides used in this study are described. The thermodynamic study associated with the insertion of these peptides into the membrane and the perturbing effects on the bilayer structure provide valuable insights into the molecular action mechanism associated with the charge of these small cationic peptides.

Thermodynamics and 2H NMR study on the insertion of small quinones into a discotic nematic lyotropic liquid crystal.

A detailed description of the distribution, interaction, and dynamics of molecules with biological activity dissolved in a hydrophobic bilayer, a simple model of a biological membrane, provides valuable information for a better understanding of drug functioning, which can be very useful in drug design. Here we present an (2)H NMR and molecular dynamics study on the insertion, distribution, interactions, and thermodynamics of two biologically active molecules, 9,10-dihydroxy-4,4-dimethyl-1,4,5,8-tetrahydroanthracen-1-one (HQ), with anticancer activity, and 4,4-dimethyl-1,4,5,8,9,10-hexahydroanthracen-1,9,10-trione (Q) a fungicide, dissolved in a nematic discotic lyotropic liquid crystal (ndllc) composed of sodium dodecylsulphate (SDS), decanol (DecOH) and Na2 SO4 in water. (2)H NMR quadrupole splittings (ΔνQ ) and longitudinal relaxation times (T1) from HQ-d6, Q-d4, DecOH-α-d2, partially deuterated water, and SDS-d25 were measured and several molecular dynamics trajectories were also calculated. In particular, ΔG, ΔH, and ΔS profiles for the process of both molecules crossing the bilayer were estimated. It was evidenced that the insertion of both molecules into the aggregate is a spontaneous process, and the molecules are mainly distributed in the internal side of the interface. Addition of HQ or Q decreased the mobility of all aggregate components, but this effect was more pronounced for HQ. The rotational correlation time of Q allowed an estimate of 5.3 cP for the microviscosity inside the ndllc aggregate, in the order of previously measured values in similar environments. Both guest molecules display similar free-energy profiles for the process of crossing the bilayer, with a calculated barrier height of 25 and 36 kJ mol(-1) for HQ and Q, respectively.

Methylene blue adsorption on a DMPA lipid langmuir monolayer.

Adsorption of methylene blue (MB) onto a dimyristoylphosphatidic acid (DMPA) Langmuir air/water monolayer is studied by molecular dynamics (MD) simulations, UV reflection spectroscopy and surface potential measurements. The free-energy profile associated with MB transfer from water to the lipid monolayer shows two minima of -66 and -60 kJ mol(-1) for its solid and gas phase, respectively, corresponding to a spontaneous thermodynamic process. From the position of the free-energy minima, it is possible to predict the precise location of MB in the interior of the DMPA monolayer. Thus, MB is accommodated in the phosphoryl or carbonyl region of the DMPA Langmuir air/water interface, depending on the isomorphic state (solid or gas phase, respectively). Reorientation of MB, measured from the bulk solution to the interior of the lipid monolayer, passes from a random orientation in bulk solution to an orientation parallel to the surface of the lipid monolayer when MB is absorbed.

Effect of Na+ and Ca2+ ions on a lipid Langmuir monolayer: an atomistic description by molecular dynamics simulations.

Studying the effect of alkali and alkaline-earth metal cations on Langmuir monolayers is relevant from biophysical and nanotechnological points of view. In this work, the effect of Na(+) and Ca(2+) on a model of an anionic Langmuir lipid monolayer of dimyristoylphosphatidate (DMPA(-)) is studied by molecular dynamics simulations. The influence of the type of cation on lipid structure, lipid-lipid interactions, and lipid ordering is analyzed in terms of electrostatic interactions. It is found that for a lipid monolayer in its solid phase, the effect of the cations on the properties of the lipid monolayer can be neglected. The influence of the cations is enhanced for the lipid monolayer in its gas phase, where sodium ions show a high degree of dehydration compared with calcium ions. This loss of hydration shell is partly compensated by the formation of lipid-ion-lipid bridges. This difference is ascribed to the higher charge-to-radius ratio q/r for Ca(2+), which makes ion dehydration less favorable compared to Na(+). Owing to the different dehydration behavior of sodium and calcium ions, diminished lipid-lipid coordination, lipid-ion coordination, and lipid ordering are observed for Ca(2+) compared to Na(+). Furthermore, for both gas and solid phases of the lipid Langmuir monolayers, lipid conformation and ion dehydration across the lipid/water interface are studied.